Matratzentopper Swiss

Mattress toppers round off the sleeping system. The mattress brings stability and sleeping comfort, the topper brings comfort.

We have developed 3 systems for our box spring beds

Cano-Orchila

1. Loose topper


The loose toppers can be placed on standard mattresses of your choice or on box spring mattresses with side cover upholstery fabric, matching the boxspring bed (Coiba, Cano, Pinta). The loose toppers can be bought separately or purchased separately. Their disadvantage is that the light topper slips on the mattress, especially with electrically adjustable head and foot sections.

2. Integrated topper


With the integrated topper, mattress core and topper are in one cover. The lower part of the cover can be made of upholstery fabric matching the box spring bed, the upper part is made of washable mattress ticking. The top and bottom parts are connected by a zip, so the topper cannot slip.

3. integrated topper with slit

Here, a special sewing technique is used to join the top and bottom sides of the mattress cover in such a way that an approx. 17 cm deep slit is created between the topper and the mattress core. When in use, a fitted sheet can only be pulled into the slit around the upper topper area, the lower area of the mattress remains visible as with the loose topper, but slipping is still impossible. The upper side of the cover is removable and washable

All toppers are available in three heights: Standard = 4 cm core height / Max = 6 cm core height / Super = 8 cm core height. The total heights are up to 3 cm higher depending on ticking and type. We recommend the standard 4 cm, because especially with soft and viscose foams a good balance between the supporting force of the mattress and the comfort of the topper is achieved.

The right topper foam, let your back decide

Evopore-HRC Schaum: (HRCF) Fester Topper mit exclusiver Feder und Rückstelleigenschaft

Basisausstattung für WETARE Matratzen. Polsterung der Premiumqualität. Die Kuhlenbildung während der Schlafphase wird deutlich reduziert. Fester Topper für Personen empfohlen, die gerne auf einer festen Unterlage schlafen.

Evopore-HRC Schaum: (HRCS) Neuentwicklung aus der Schweiz. Soft, optimierte Stützwirkung lange Lebensdauer

Polsterung der Premiumqualität. Der Topperschaum ist sehr weich eingestellt und sorgt für Druckentlastung während des Schlafs. Die Kuhlenbildung während der Schlafphase wird deutlich reduziert. Evopore HRC Schaum ist eine Weiterentwicklung des Kaltschaums, ist langlebig und optimiert für Belastung durch Druck, Temperatur und Feuchtigkeit. Für mehr Info klicken Sie hier

Viscopore: Viscose foam from Switzerland. Uniquely open-pored and breathable, washable

uniquely open-pored visco-foam from Switzerland. The air-permeable cell structure allows sweat to be absorbed. The foam is boil- and tumble-proof. For more information click here